prev-post
How to repair cabinet furniture at home
Previous article
How to repair cabinet furniture at home
next-post
How to remake old furniture with your own hands, illustrative examples before and after
Next article
How to remake old furniture with your own hands, illustrative examples before and after

Simple ways to paint furniture facades, important nuances of technology

Simple ways to paint furniture facades, important nuances of technology

Sometimes, every person wants changes in their surroundings, for example, to completely remake the interior in a room or in the kitchen. Painting of furniture facades will help to fit old cabinets into a new environment. This measure helps to significantly save on replacing furniture sets and choose the color of new rooms, not limited to shades of existing things. The owners will be able to do all the work on their own, even if they had not previously had to paint furniture.

Necessary tools and materials

If the decision to change the interior is final, painting of furniture facades becomes inevitable. Before starting work, you should determine the necessary tools materials:

  • Paint (oil, latex, water dispersible, alkyd, stain). Auto enamel can be used, it is moisture resistant, does not change its appearance with temperature changes;
  • Paint rollers and brushes. They are selected depending on the paint used: for water-based emulsion, choose velor, and for acrylic, stain or varnish - choose a brush, roller made of natural or combined wool;
  • The primer must be purchased depending on the chosen paint. The suitability of the materials can be determined after a careful study of the packaging;
  • Degreaser. For facades made of wood or MDF, a composition that includes an organic solvent is used. This product is capable of removing grease, oils, fats, silicones;
  • Sandpaper, felt, a piece of wool;
  • Building hair dryer;
  • Gloves;
  • Masking tape;
  • Screwdriver or screwdriver;
  • Drill.

Any furniture facades can be painted, but products from MDF and solid wood behave better than the others in this procedure.

Furniture Painting Tools

Paint technology

The durability of the coating depends on the correct application of the paint. First of all, it is necessary to prepare the space for work. Furniture facades should be painted in a large, well-ventilated room. The air temperature is maintained at least 20 degrees Celsius.

Surface preparation

When the room for painting is selected and there are all the necessary tools, you can proceed to the first stage. First you need to disassemble the furniture and remove all accessories from the facades. The old coat of paint is removed from the stove. At this stage, it is convenient to use a building hair dryer, it allows you to perform this work in less time. The pre-heated paint begins to peel off and is easy to remove.

You can use special solvents to remove paint, but such compositions have an unpleasant corrosive odor, which makes it impossible to use indoors.Another alternative to building hair dryers is coarse sandpaper. Manual paint removal takes a lot of time. When using sandpaper, a large amount of dust appears, it will be necessary to periodically remove it with a vacuum cleaner. There is a chance of damage to the facade itself, so sandpaper is best used in extreme cases.

It is not always required to completely remove the old coat layer. Applying paint to a varnished surface is inefficient due to poor adhesion. Sanding the part will help to increase it. After processing, you can proceed to degreasing and painting. It is worth remembering that MDF panels are very often covered with a polyvinyl chloride film, it must be completely removed and only then proceed to the next stages of work. The surface under the film is treated with sandpaper.

Under the coating layer surface defects are visible. To deal with cracks, chips and dents, you can use putty for wood.

  • Gypsum putty is an environmentally friendly option with a low cost and good performance properties, great for indoor work, as it does not have a pungent odor;
  • Latex or acrylic formulations have greater durability, but their cost is much higher. The composition is applied in a thin layer (1-2 mm) to avoid cracking after solidification.

The putty of the base layer may not be combined in color with the workpiece, but it should not stand out much on the surface. The base coat should have good adhesion for better adhesion to the paint.

How to paint furniture
Remove a layer of old paint
Degreasing furniture before painting
Degreasing coating
Removing cracks from furniture
Putty on cracks

Grinding

To obtain a flat surface after painting, it is necessary at the very beginning to think about its polishing. After application and complete drying of the putty, you need to arm yourself with large emery paper and clean the surface. The grain size of the abrasive material used is gradually reduced to bring the surface to a perfectly smooth state. Do not get involved in the process and use the smallest types, it is enough to process the wood boards with paper marked P400 and P600.

Sanding wood

Painting

Painting includes several stages:

  1. Degreasing - first, the sanded surface is treated with a degreaser. To do this, wipe the panels with a swab soaked in the composition. After work, the surface should dry. It is not allowed to touch fat-free wood. This step is necessary for a good adhesion of the wood panel and the applied paint. The degreaser dries very quickly, so a few minutes after applying it, you can proceed to the next step;
  2. Primer - this should be a special composition for use on wooden surfaces. For uniform application of the primer, each subsequent layer should be perpendicular to the previous one. Do-it-yourself priming of facades with a roller or brush. The primed part must dry, it will take about a day;
  3. The next step is painting. The technology for its implementation may differ, depending on the materials, the initial and desired color of the furniture facades. In any case, the painting should be started from the ends of the workpiece and only then proceed with the processing of the front side.

Before applying the paint with a spray gun, you can practice on a workpiece or an unnecessary piece of wood. This will help to choose the optimal spray width; it should be small. Depending on the color of the workpiece and the paint, it is necessary to apply several layers, usually three is enough, but if the parts painted with color have unevenly worked out parts, then it may be necessary to coat several more times.

After each layer, part of the facade is left for 10-15 minutes and the paint is allowed to dry a little.You can paint light parts using tint varnish, when applying several layers of which the part acquires the necessary shade. It should be remembered that light paint applied to dark wood completely covers the structure of the material.

Degreasing a furniture facade
Degreasing coating
Choose a primer
Primer
MDF panel painting
Paint the surface

Applying varnish

Correctly painting the facade is not enough, it is necessary to protect the new coating from accidental damage, exposure to direct sunlight, moisture. To do this, it is advised to apply a layer of varnish.

  1. First you need to determine the type of varnish. Nitrolac is excellent for outdoor use, protects wood from environmental influences, it is very toxic and is not intended for indoor use. Water-based varnish is an environmentally friendly composition used indoors. It will take about two weeks to fully dry;
  2. Next, you can begin to prepare the premises. Varnishes dry for a long time and during this time there should be a minimum amount of dust around the furniture element. To do this, before starting work, wet cleaning should be carried out, a protective film should be laid on the floor against accidental contact with varnish. The air temperature during operation should be +20 degrees. Even when using odorless materials, care must be taken to ensure good ventilation;
  3. Before applying varnish, the surface must be cleaned of dirt and treated with fine-grained sandpaper. Movements should be directed along the wood fibers. You can clean the product from dust with a vacuum cleaner. Do not use a damp cloth;
  4. The surface is again covered with a primer and wait for its complete drying;
  5. Application of varnish. The choice of tool depends on the type of material. The brush is used when working with oil varnishes. For uniform application, it is advised to choose tools with natural bristles, split at the ends. The swab is needed for alcohol-based varnish. It can be made from a small piece of wool wrapped in linen cloth. The tool is completely dipped in a varnish and impregnated with it, then applied with quick movements along the fibers. Sprayer to speed up the application process. Use it is allowed only in rooms with excellent ventilation.
Choose furniture varnish
Choosing furniture varnish
Wet House Cleaning
We carry out wet cleaning
The process of grinding the edges of plywood
We process facades with sandpaper
Primed furniture before painting
Ground surface
Furniture Varnishes
Varnish

Finishing and decoration

After the varnish has dried, it is necessary to polish the surface. First, coarse defects are removed with fine sandpaper, and only after that they start polishing with special compounds and tampons from flax. To obtain a good result, the polishing mixture is applied with quick movements in three layers with an interval of 12 hours.

After finishing work, you can assemble furniture. The holes for fixing hardware, most likely, will have to be drilled again, because the old ones will be primed, covered with paint and varnish. All parts must be reinstalled.

Wood aging
We remove gross defects with sandpaper
Furniture polishing
Polish the surface

Common mistakes

Painting is a complex and time-consuming process, so during operation often unpleasant errors occur, leading to marriage and defects:

  • Lack of varnish coating on the surface, as a result of which the paint is soon erased, scratched and spoiled;
  • Touching a fat-free surface, or completely neglecting this step. The paint will peel off and unevenly lay down;
  • Extraneous debris on a dry surface of paint or varnish;
  • Painting parts without first removing the old layer;
  • Low humidity, during work it should be at least 70%;
  • Application of very thick materials, resulting in the formation of "shagreen leather". This defect cannot be fixed, so you should pre-test the material on a test sample;
  • Lack of personal protective equipment. Paint and varnish are washed off very hard and can cause irritation on the skin;
  • Poor ventilation can lead to poisoning by harmful fumes;
  • Not enough paint. Mixing it with color is necessary to lay a small margin;
  • Violation of storage standards for materials, as a result of which they become unusable.

Video

Link to the main publication

Sofas

The beds

Cabinets