prev-post
Functional characteristics of a sewing table, DIY assembly
Previous article
Functional characteristics of a sewing table, DIY assembly
next-post
Tips for making a moisture proof plywood cutting table
Next article
Tips for making a moisture proof plywood cutting table

Desk configuration for two children, selection criteria

Desk configuration for two children, selection criteria

When two school-age children live in the same room in a family, the issue of the working area is very acute. After all, the presence of a place where you can practice daily is required for each of them. This problem can be solved by a desk for two children, which will allow students to complete homework at the same time. When choosing this piece of furniture, it is important to consider certain features: the material of manufacture, the size of the work surface, the availability of space for accessories, and more. In addition, parents should remember that it is important that the table is properly positioned in the room.

Design features

When two children of school age live in one room, parents need to organize two study places at once. In rare cases, the size of the room can accommodate two separate desks. Therefore, many try to pick up one large desk. When choosing furniture for students, it is important to consider such features:

  • the product should be preferred of sufficient dimensions so that children do not interfere with each other, sitting next to classes;
  • separate boxes, bedside tables and shelves for student supplies should be provided;
  • it is better to choose models that can be adjusted for the growth of the child;
  • On the surface of the table there should be enough space for each child and at least two table lamps.

Standards have been developed that must be followed when choosing a table:

  • the working field for students should be at least a meter wide and at least 0.6 meters deep;
  • for setting hands requires an area of ​​50 x 50 cm.

There are standards whose purpose is the correct distribution of the load and the preservation of the physical health of the musculoskeletal system of the child when working at the desk. They regulate the parameters of tables and chairs for different age groups:

Height (cm) Minimum width Length (cm) Depth (cm) Distance between supports
from 85 to 100 45 60-110 30-40 42
from 100 to 190 50 60-120 40-50 42-45

Correctly selected is the height of the desk for two children, if the end of the product is in the solar plexus of the child.

Configurations

Tables for two children are offered in various configurations:

  1. Double table. The model is a rectangular tabletop with side tables on the sides. This product is suitable for children close in age. The table saves space. Children are nearby. Among the disadvantages of such a product, it is necessary to highlight the need for equipping the table with additional daylight lighting, if not placed near the window.
  2. Bedside table-chair-chair-bedside table - placement similar to the previous version, however, the model takes up much more space. Children are nearby. Of the advantages, there is a large working area for each.This table for two children is suitable for large rooms.
  3. Corner designs are appropriate in rooms with a small area. Desks for two children of this model can be placed in a corner or near a window, which frees up space near the walls for cabinets or any other furniture. In addition, sitting down at the corner table, the children are arranged with their backs to each other. This helps them focus and not be distracted when doing homework.
  4. The U-shaped table is a design with one stand and two countertops on the sides. It takes up more space, while the children are facing each other. The work surface of this table is not very large. Of the advantages distinguish ease of use and the presence of additional lighting.
  5. Direct with a roll-out countertop - this design takes up a bit of space in the room. When purchasing this table for a student, it is necessary to provide for the presence of free space to accommodate the extendable tabletop. This design is convenient in that it saves space. Children at this table are placed on the line, so you have to worry about additional lighting.

When choosing lighting, it is necessary to take into account that for a right-handed person, light should fall on the left, and for a left-handed person on the right.

Double table
U-shaped
Direct with draw-out worktop
Nightstand-chair-chair-nightstand
Angular

Location in the nursery

After the acquisition, it is important to properly position the desktop. For the corner model, the most optimal will be the rotation, given the natural lighting, from the right wall to the window. For left-handed people, a left-handed workplace is suitable. Any other location will require additional lighting: table or wall lamps.

When placing a table for two children by the window, it is important that there is no draft. If there is a thermal battery under the window, then you should leave the gap between the furniture and the radiator for air circulation. An obvious plus of this arrangement is the saving of space in the room plus the presence of a natural light source from the window. But the table by the window in the nursery has its drawbacks: you will need to carefully insulate the window frame. In addition, it is better to remove everything from the windowsill immediately, so that after not to reach for the necessary things through the table.

For large rooms, it is acceptable to place a desk for two students along the wall. Of the advantages of this choice, the opportunity to hang shelves above the table is highlighted. Of the minuses of this option, a lack of natural light in the area of ​​the workplace is obvious.

Near the window
Near the wall

Height selection

If we talk about the growth of the child, then when choosing a desk should be guided by the following parameters:

Child height (cm) Table height (cm) Chair Height (cm)
up to 80 34 17
80-90 38 20
90-100 43 24
100-115 48 28
110-119 52-54 30-32
120-129 54-57 32-35
130-139 60-62 36-38

Often, parents prefer to purchase children's furniture, designed for several years of operation. The best choice for this situation is adjustable products. They are made so that with increasing growth the structure can be changed to the appropriate height. Such models are more expensive, but as a result they can significantly save.

It is important that students sit correctly at the desk for two children, because improper body position can provoke problems with posture:

  1. When the child is sitting, his chest should not touch the edge of the countertop, moreover, between them must pass a child’s fist.
  2. With the correct height of the table and chair, the elbow of a straight outstretched arm should be 5 cm below the table.
  3. Lean as little as possible above the work surface.
  4. When sitting, the knees should form a right angle, as well as the hips with the lower back. Feet should stand firmly on the floor or on a special stand.
  5. The correct position on the chair implies that the back is fully supported by the back and forms a right angle with the hips. Elbows should lie on the surface of the countertop.
  6. When working at a computer between the eyes and the monitor should be at least half a meter.It is necessary that the view falls from above, at an angle of 30 degrees. The monitor must be installed in the center of the visibility zone.
  7. When writing right-handed, it is necessary to place the notebook to the left, and left-handed to the right 30 degrees. This position will allow you not to turn the torso.
  8. When reading, it is necessary to slightly tilt the book towards you, so the body will be able to independently adopt a natural position and relax the muscles of the back and neck.

If the desk is designed for use by two children of different age and height, then in this case, you can purchase special adjustable supports for the feet. With their help, subsequently, you can easily adjust the correct position of the body at the table. In addition, you can give preference to special chairs with adjustable height and built-in stand for feet.

Design and materials

When choosing a desk for children, it is necessary to focus on the general style of the children's room. But at the same time, preference should be given to concise, convenient and comfortable models. Excessive decor and pretentiousness in this case are inappropriate. In terms of design, it is better to choose the most neutral models.

The color scheme should be combined with existing shades in the room. With a large difference in age or for heterosexual children, it is permissible for jobs to be of different colors, combining with each other and with the color scheme of the room. It is good if the fittings of the product will be in the same style and color with the rest of the furniture available in the room.

When choosing a desk in a nursery, you can give preference to pastel colors. Acceptable pink, blue, greenish shades. Light brown, sand paints or woodgrain options are possible. Do not choose dark colors, they will overload the look of the room.

Now on the furniture market, products from various raw materials are presented:

  1. Wood is a natural material. Of the advantages of such a basis, environmental friendliness and strength are distinguished. Wooden models look decent and easy to use. Hard wood is resistant to damage. The disadvantage of this product is its high price.
  2. Derivatives of wood (particleboard, MDF, etc.). Such furniture items have a shorter life, they are afraid of moisture. Their surface rather quickly abrades, exfoliates. The advantage can be called low cost.
  3. Plastic furniture is comfortable and light. The cost of such models is low. However, over time, this material releases harmful substances into the air. In addition, such products are fragile, easily scratched and, as a result, look unpresentable.

A table made entirely of wood can be bulky. It is better to give preference to a model with a wooden tabletop and metal legs. Such a product is best suited for a children's room.

Tree
MDF
Plastic
Chipboard

Useful Tips

When placing a table in a children's room, it is important to think over and calculate all the possibilities of arranging furniture and choose the most suitable option.

  1. For a small children’s room, a direct desk along the wall or window is suitable.
  2. A product with drawers and shelves will help organize storage for both children.
  3. Additional shelves on the wall will also help accommodate all the school supplies.
  4. Light items of furniture are more suitable for a children's room.
  5. Products on two countertops with an inclination will form a correct and beautiful posture.
  6. The presence of additional light sources will help children maintain good vision.
  7. Well, if the nursery has a minimum of outdoor furniture, this will relieve the space of the room. It is better to distribute children's things along the entire height of the walls.
  8. If it is not possible to place a table along the window, do not worry. Modern table lamps can provide the right lighting for your work surface.

Desks for two children are a great option when you need to organize their workspace. These models save space and provide a decent working area for two students. Following all the necessary selection criteria, you can find a good model that will preserve the health of children and save parents.

For a small nursery, a direct table is suitable
Additional shelves on the wall will also help accommodate all the necessary accessories.
A product with drawers and shelves helps organize storage space.

Video

A photo

Link to the main publication

Sofas

The beds

Cabinets